How much gas does a gas geyser use?
How much gas a geyser uses depends on how much hot water you heat – not on the size of the geyser. A household taking two 8-minute showers a day spends about R295 a month. Your flow rate, the incoming water temperature and how hot you set the water are what move that figure, so set them below for your own household.
Gas geyser consumption calculator
Gas cost per month
R295
2 showers a day
8 minutes at 9 litres a minute
About R291 a month cheaper than an electric
150 L · 2 kWh/day tank · standing heat loss included
An electric tank runs out after about 3 showers back to back.
A gas geyser never runs out of hot water.
- Each gas shower
- R4.92
- Each electric shower
- R5.88
- Hot water used
- 72 litres
- Gas used
- 0.135 kg
- Showers per 48 kg bottle
- 354
- A 48 kg bottle lasts
- about 6 months
The same shower in winterR6.84
What size gas geyser do you need?
A 9 litre a minute shower needs a 10L geyser or bigger to run. Work out my size
Dewhot burners run at about 87% efficiency, depending on the model. An electric element is taken as 100% efficient.
How is gas geyser consumption calculated?
Your consumption comes down to how many litres you heat, by how many degrees, for how long.
Four things determine your gas consumption:
Water flow rate
The lower your tap flow rate, the less gas you burn. A 6 L/min shower head uses a third less than a 9 L/min one over the same shower.
Incoming water temperature
Colder water needs more gas to reach the same temperature, which is why the same shower costs less in summer.
Your temperature setting
Heating water to 40°C uses less gas than heating it to 45°C.
How long you run the tap
A five-minute shower uses half the gas of a ten-minute one at the same flow and temperature.
Does a bigger gas geyser use more gas?
No. All Dewhot gas geysers use the same amount of gas to heat one litre of water. What uses more gas is heating more water, so a tap with a faster flow rate will increase your gas consumption. What the size decides is how many litres you can heat at once. A 12L can heat up to 12 litres a minute, a 20L can heat up to 20. Feed both geysers with the same 9 L/min shower head and they use the same amount of gas.
Servicing multiple outlets
Multiple-use models are designed to supply several outlets at a time; single-use models can only supply one. Add up the flow rates of every tap that might run at once, and pick a geyser size that equals or exceeds that total. Two showers running at 9 litres a minute each come to 18, so a 16L would fall short and a 20L is the size to fit. If you are happy never to run them together, you only have to cover one shower, and a 10L single-use model will do.
Our gas geyser model and size guide walks through choosing the right size.
How can I reduce my gas consumption?
Reduce the water you heat, or the temperature you heat it to.
- Take shorter showers.
- Fit a lower-flow shower head.
- Set a sensible temperature.
- Buying a smaller geyser does not help. The size of your geyser has to meet your flow rate, and undersizing means running it at full tilt instead of comfortably within its range.
Gas geyser vs electric geyser: running costs
Gas costs about half as much to run. On two 8-minute showers a day that is roughly R295 a month, against about R590 on a 150-litre electric geyser – a saving of around R290 a month, or R3 500 a year. The bigger the electric geyser, the more you save: about R230 a month against a 100-litre tank, and about R410 against a 250-litre one.
A gas geyser only heats water when you use it. Open a hot tap and the burner lights; close it and the burner goes out. An electric geyser spends energy reheating the water in its tank all day, even if nobody uses it. That waste is where most of the saving comes from. The calculator above works it out for your own usage.