8L Gas Geyser IndoorLow Pressure Eco-Flow
The indoor Low-Pressure Eco-Flow 8L Gas Geyser, perfect for off-grid locations, heats water on demand even with super low water pressure, delivering a continuous flow of up to 8 litres of hot water per minute through a single outlet.
B Type install indoors with ventilation and flue
Buy Now Pay Later. Payment Options at checkout.
Low pressure
Dewhot’s low-pressure gas geysers use water flow sensor activation to work efficiently even with low water pressure sources like municipal water or gravity-fed tanks.
Energy saving
Enjoy maximised energy savings with on-demand heating, only heating water as you need it.
Double safety
Flame shut-off and pressure relief protection for ultimate peace of mind.
Indoor installation
This gas geyser model must be installed indoors with a 110mm flue or 110mm flexi flue
• 84% energy efficiency
• Geyser can function on low and high water pressure
• Ventilation is required
• Compatible with mixer taps
• Flame failure safety device (FFD)
• LCD temperature display
• Requires no electricity – flame ignition and geyser functions are battery operated
• Pressure Relief Protection (to function effectively, the valve must be set to your water pressure)
Max gas pressure 2.8kPa
Max gas consumption 1.32 Kg / hour
Rated Input 16Kw
Water pressure 20-500 kPa
Min water output 2L /min
Max water output 8L/ min
Unit weight 8.5 Kg
Packaged weight 10 Kg
Unit size 590 X 320 X 210m
Packaged size 650 x 350 x 255 mm
Gas Type LPG
Sku: LPD8DH
Cylinder vaporisation rates
(maximum short term use)
48kg = 1,9kg/hr
19Kg = 0,92kg/hr
9kg = 0,46kg/hr
Minimum cylinder size = 19kg
Minimum regulator size = 4kg/hr
Minimum ID pipe size
12mm = less than 7 meters
16mm = between 7-20 meters
Products required for the Indoor Eco-Flow 8L Gas Geyser
The Dewhot Bucket Test : Determine your flow rate
Indoor Low Pressure Eco Flow 8L Gas Geyser FAQs
The 8L Low Pressure Gas Geyser is a single-application gas water heater that can service either a bath, a shower or a sink. The temperature of a low pressure gas geyser is manually calibrated to the flow rate of the single outlet. The 8L Low Pressure Gas Geyser provides a continuous flow to a single outlet with a flow rate of up to 8 litres per minute
Remember, for optimal performance, ensure the flow rate doesn’t exceed 8 litres per minute.
The 8L rating means this geyser can heat up to 8 litres of hot water per minute. The 8L low pressure gas geyser can provide a continuous flow of hot water to a single outlet with a maximum flow rate of 8L per minute, such as a shower or a bath. Unlike electric geysers with limited tank capacity, this gas geyser heats water on demand, so you’ll experience a consistent hot water supply as long as you have gas!
The logic tree is a tool that guides you through a series of questions to help find the gas water heater solution the would be most suitable for your individual home set up.